Drip Lines
IrriSmart offer 2 bespoke dripline solutions, The spacings and flow rates have been developed over may years in French vineyards although we can create bespoke to suit any location, climate, environment, planting or soil type.
-
UniWine AS – this system is designed for new vineyard and is installed below the surface, this reduces damage from insects and animals, also transpiration, and humidity therefore reducing disease risk.
-
UniWine RC – is specifically designed for established vineyards and can be laid on the ground or clipped to wire support to keep it away from damage.
-
Both system give 100% uniform aplication from the first emitter to the last. And with proper system design will give 100% uniform aplication of water and nutrients across the whole vineyard.
-
Tefen - Proportional Injectors
Features & Benefits
â– Hydraulic, volumetric and non-electric.
â– Mixes additive and water precisely.
â– Dosing proportional to water flow rate.
â– Excellent dosing repeatability and homogeneity.
â– Easy dosing adjustment.
â– Easy to install, operate and maintain.
â– Key internal parts are from the highest quality material
*Available (Hastelloy spring. Viton Rubber seal)
​
Irrigation Application
The objectives of fertigation are to control water quantities and added nutrients necessary for optimum growth of crops. MixRite™ proportional injection technology means less waste, plus a better mix for fertilizers, pesticides and other water soluble products.
Simple maintenance
MixRite™ is the simplest injector to use. Less maintenance is required, and no technician is needed for changing spare parts.
Simple Installation
MixRite™ is a "Plug and Play" unit. Installation of MixRite™ can be done by using the instructions which are attached to each unit
Adjusting the MixRite Pump
The injection rate is set up manually by rotating the sleeve to the desired proportion. The amount of injected concentrate is proportional to the amount of water flowing into the MixRite™ pump.
Operating principle
The unit will automatically start working when water is flowing in the water line and continue until the flow will stop; it is possible to control the suction (intake) operation by using the models with the On/Off system.
MixRite 1
1m3/hr
Water pressure 0.2 – 8 bar (2.9 – 116 psi)
Flow Rate 20 – 1000 l/h (0.09 - 4.4 GPM)
Working temp 4-40Ëš C (39.2-104Ëš F)
Coupling 3/4”
MixRite 2.5
2.5 m3/hr
Water pressure 0.2 – 8 bar (2.9 – 116 psi)
Flow Rate 10 – 2500 l/h (0.044 - 11 GPM)
Working temp 4-40Ëš C (39.2-104Ëš F)
Coupling 3/4”
Dosing Rate 0.3-2% (other available on request.
* Avalailable in for Acid, Chlorine or Car wash.
* Legs available upon request
MixRite TF5
5 m3/hr
Water pressure 1 – 8 bar (2.9 – 116 psi)
Flow Rate 100 – 5000 l/h (0.044 - 11 GPM)
Working temp 4-40Ëš C (39.2-104Ëš F)
Coupling 1”
Dosing Rate 0.5-5% (other available on request.)
* Available in for Chlorine
* Legs available upon request
TF 10
10 m3/hr
Water pressure 1 – 8 bar (2.9 – 116 psi)
Flow Rate 100 – 10,000 l/h (0.044 - 11 GPM)
Working temp 4-40Ëš C (39.2-104Ëš F)
Coupling 1 1/2”
Dosing Rate 0.2-2%
0.5-5% (other available on request.)
* Available in for Chlorine
* Legs available upon request
TF 25
25 m3/hr
Water pressure 1 – 8 bar (2.9 – 116 psi)
Flow Rate 200 – 25,000 l/h (0.044 - 11 GPM)
Working temp 4-40Ëš C (39.2-104Ëš F)
Coupling 2”
Dosing Rate 0.3-2.5%
0.5-5% (other available on request.)
* Available in for Chlorine
* C/W Legs
MixRite E300
All Flow Rates
Water pressure 0 - 5 bar
Flow Rate All
Working temp 4-40Ëš C (39.2-104Ëš F)
Coupling 10mm pipe 1/2" connections
Dosing Rate 10-100% 21 - 300l/hr Depending on pressure
* Input pulse required
TreatRite Bypass
High Flow Rates
Water pressure 1 – 8 bar (2.9 – 116 psi)
Mainline Flow Rate 2" - 6-25 m3/hr
3" - 15-50 m3/hr
4" - 30-100m3/hr
Working temp 4-40Ëš C (39.2-104Ëš F)
Coupling 1”
Dosing Rate 2" - 0.003-1%
3" - 0.01-0.5%
4" - 0.01-0.5%
* Suitable for Chlorine Dioxide, Sodium Hydrochloride & Hydrogen Peroxide.
Watch Guard
Dilution System (Acid)
-
Achieve accurate ultra-lean dilution in 2 easy steps
-
Effective with acid, chlorine and most other chemicals
-
Watch Guard is simple to mount on any drum, tote or other reservoir
-
Automatically activates to keep reservoir full of diluted solution
-
Metering tip included for dilutions from 0.25% to 14.2%
-
Includes ASSE 1055B approved action gap backflow preventer
-
MixRite attaches in-line to the water supply
-
Delivers accurate proportioning regardless of wate flow or pressure changes
-
Multiple models available for injection rates from 1% to 10% and water flow from 227 - 25000 liter per hour
*Not including tanks or dosing units.
